Xtramus NuApps-2544-RM V1.3 Manual de usuario descargar pdf (Pagina 30)

Protocol

¾ Port No.: This field displays each port’s Port ID.

¾ Protocol: The Protocol scroll-down menu allows you to set each port’s protocol to either Layer 2

or Layer 3-IP.

• Layer 2: Packets will be transmitted and received via layer 2 MAC addresses.

• Layer 3-IP: Packets will be transmitted and received via layer 3 IP addresses.

¾ Port MAC: These fields display the MAC addresses of all ports.

¾ Enable VLAN: VLAN (Virtual LAN) is a group of hosts with common requirements that

communicate within the same Broadcast domain regardless of the physical location. Setting the

Protocol to Layer 2 and enabling VLAN allows you to make settings for the following options:

• VID: VID stands for Virtual ID, an ID number for identifying different virtual LANs on the

network. You can set the VID for each port.

• CFI: CFI stands for Canonical Format Indicator, a 1-bit field in frames for compatibilities of

Ethernet and Token Ring networks.

• VLAN Priority: VLAN Priority (IEEE P802.1p) indicates the priority level of frames transmitted

from each port. The value can be set from 0 to 7.

¾ Port IP/Gateway IP/IP Mask: These three fields can only be set when you set the Protocol to

Layer 3-IP. You can input each port’s IP Address, Gateway IP Address, and Default Mask in

these fields.

E-mail: sales@xtramus.com

Website: www.Xtramus.com

XTRAMUS TECHNOLOGIES

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 49 50

Sin comentarios

Xtramus NuApps-2544-RM V1.3 Manual de usuario Pagina 30