Xtramus NuApps-QoS-RM V1.1 Manual de usuario descargar pdf (Pagina 13)

E-mail: sales@xtramus.com

Website: www.Xtramus.com

XTRAMUS TECHNOLOGIES

Starting NuServer

If an error message window pops up and

says “Detecting NuServer System Fail”,

please close NuApps-QoS-RM and

NuServer, and start again.

After starting NuApps-QoS-RM, a Select Config window will pop up. You have to reserve ports on module

cards before performing tests with NuApps-QoS-RM. Please follow the steps down below and make the

proper configurations for NuApps-QoS-RM.

Port Reserving

As mentioned above, you have to reserve ports

on module cards before performing tests with

NuApps-QoS-RM. You can do so by either

choosing Open an Existing Configuration or by

Create a New Configuration.

If you have a previously saved configuration file

stored in your PC, you can load it and apply all

the setting you’ve made by choosing “Open an

Existing Configuration” from the Select

Config pop-up window.

Configuration files are saved in the format of

“*.xml”, and are named with Tester Name, DUT

Name, and the date/time when the files are

created.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 50 51

Sin comentarios

Xtramus NuApps-QoS-RM V1.1 Manual de usuario Pagina 13