Xtramus NuStreams-P9M V2.1 Manual de usuario descargar pdf (Pagina 42)

NuPAD Firmware Upgrading

Before upgrading NuPAD’s firmware, please connect NuPAD, NuStreams-P9M, and your PC

according to the figures and descriptions down below:

→

1. Connect NuPAD with NuStreams-P9M’s

Console port via a RJ45 cable.

2. Connect NuStreams-P9M’s USB port with your

PC via mini-USB cable.

After connecting NuPAD, NuStreams-P9M, and your PC according the descriptions shown above,

please start upgrading NuPAD’s firmware by the following steps:

To start upgrading NuPAD’s firmware, click Service

→ System Upgrade on the Menu Bar, and

choose NuPAD Upgrade.

Select where NuPAD’s firmware (in the format of

“＊.bin”) is stored in your PC, then click “Open”.

Click Yes to start upgrading firmware.

NuStreams-P9M will start the NuPAD firmware

upgrading process. Please note that during the

upgrading process, NuPAD, NuStreams-P9M, and

your PC must be power on and connected properly

at all time.

XTRAMUS TECHNOLOGIES

Website: www.Xtramus.com

1 2 ... 37 38 39 40 41 42 43 44 45 46

Sin comentarios

Xtramus NuStreams-P9M V2.1 Manual de usuario Pagina 42