Xtramus NuStreams-P9M V2.1 Manual de usuario descargar pdf (Pagina 46)

5.3. Starting DUT Tests with NuPAD

NuPAD has 3 buttons on its front panel: “|| Pause”, “■ Stop”, and “

► Run”. After connecting NuPAD

with NuStreams-P9M with Cat-5 cable, you can start/pause/stop DUT tests with these 3 buttons.

Please see the table down below for a detailed description about these buttons’ functions.

Function Button Description

Start Testing All Tasks

in Current Run

► Run Press “► Run” to start all Tasks in

the current Run. The current Run

(Run 1~3) about to be tested will

be displayed on the upper-right

part of LCD.

Switching Current Run || Pause

■Stop

To change the current Run (Run 1~3), press both “|| Pause” and “■

Stop” buttons at the same time. If NuPAD is current in Run 1, pressing

both “|| Pause” and “■Stop” buttons at the same time will switch the

current Run from Run 1 to Run 2.

Pause Current Running

Test

|| Pause

Press “|| Pause” button once to pause the current running test. Press “||

Pause” button again to resume the test.

Stop Current Running

Test

■Stop Press “■Stop” button once to stop the current running test.

XTRAMUS TECHNOLOGIES

Website: www.Xtramus.com

1 2 ... 41 42 43 44 45 46

Sin comentarios

Xtramus NuStreams-P9M V2.1 Manual de usuario Pagina 46