Xtramus APMPT-4 V2.4 Manual de usuario descargar pdf (Pagina 117)

117

E-mail: sales@xtramus.com

Website: www.Xtramus.com

XTRAMUS TECHNOLOGIES

Test Procedure

 Learning Setting:

 Enable Learning: Enabling this function allows learning packets transmitted to the DUT before

test packets are transmitted. If you disable this function, no learning packets will be transmitted.

 Broadcast: Select the learning packet mode for Broadcast mode.

 Unicast: Select the learning packet mode for Unicast mode.

 The Same with Testing Packets: The learning packet mode will be the same as the Testing

Packets settings.

 Frame Count: Repeat frame count per learning packets burst.

 Frame Gap: Duration time between learning frames.

 Tx Pkt Timeout: If the system fails to send the learning packet within the time you set in TxPKT

Timeout field, the packet will be drop.

 Tx Mode: You can change how learning packet will be transmitted. By clicking the Tx

scroll-down menu, you can choose Sync Mode, Group Mode (transmitting gap can be set in the

Gap field located down below), and Sequence Mode.

 Delay Time After Learning: The time gap between after learning and the next process.

 MediaType Setting:

 Minimum Waiting Time: APMPT-4 will halt at least for the Minimum Waiting Time you input

here during auto-negotiation process.

 Media Type Waiting Timeout: If the time spent for auto-negotiation exceeds the Media Type

Waiting Timeout you set here, the test will stop and the test result will be fail.

 Capped Mode (limit loop count): Selecting this function will allow packets to be transmitted by

sequence.

 Weak Back-off Mechanism: When packet collision occurs, the system will wait for at least 1

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 144 145

Sin comentarios

Xtramus APMPT-4 V2.4 Manual de usuario Pagina 117