Xtramus APMPT-4 V2.4 Manual de usuario descargar pdf (Pagina 134)

134

E-mail: sales@xtramus.com

Website: www.Xtramus.com

XTRAMUS TECHNOLOGIES

 Disable Check Result: When this mode is enabled, all test procedures will be carried out no

matter the result is Pass or Fail.

 Enable S/N Error Check: Selecting this option will enable the capturing of S/N Error.

 Enable DI Checksum: Enable this function to add a tag to the frame for tracking frame integrity.

 Weak Back-off Mechanism: When packet collision occurs, the system will wait for at least 1

slot-time before starting to transmit packets again if this function is enabled.

Learning

 Ports A/B:

 Enable Learning: Enabling this function allows learning packets transmitted to the DUT before

test packets are transmitted. If you disable this function, no learning packets will be transmitted.

 Broadcast: Select the learning packet mode for Broadcast.

 Unicast: Select the learning packet mode for Unicast.

 Frame Count: Repeat frame count per learning packets burst.

 Frame Gap: Duration time between learning frames.

 Global:

 Tx Pkt Timeout: If the Tx packets spent for auto-negotiation exceeds the Tx Pkt Timeout you set

here, the test will stop and the result will be fail.

 Delay Time After Learning: The time gap between after learning and the next process.

 Tx Mode: You can change how packet streams will be transmitted. By clicking the Tx scroll-down

menu, you can choose Sync Mode, Group Mode (transmitting gap can be set in the Gap field

located in the right side), and Sequence Mode.

 Gap: Set the transmitting gap for Group mode.

 Learning by Sequence: Learning by port sequence.

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 144 145

Sin comentarios

Xtramus APMPT-4 V2.4 Manual de usuario Pagina 134